Are you facing some trouble with your boat engine? Among other things, it’s highly possible that your spark plug is causing the problem.
It is very important to understand the symptoms. It will help you take action beforehand and could also save you some trouble.
So, what are the symptoms of bad spark plugs outboard?
Symptoms include the engine not starting properly, and the engine cutting out. And also loss of engine power decreased engine acceleration, etc. The color of the spark plug can also tell a lot about your engine. For example, if it’s bright white it means your engine is overheating and losing power.
This information is pretty vague and probably not enough. To help you, we have gathered everything we could find about bad spark plugs.
Let’s jump into the main part.
Symptoms Of Bad Spark Plugs
If the spark plug is failing, it will affect your boat engine. You need to regularly check for symptoms. Always have an idea of how long do spark plugs last in an outboard.
Also, check for visible signs. Spark plug color and state can spill a lot about the condition of your boat engine.
Here is a chart to make it simpler for you.
|Trouble starting the engine||Black color, built up residual carbon||Clean|
|Engine cutting out||Wet and oily||Wash|
|Engine losing power||Bright glossy white||Retighten|
|Decreased acceleration||Bright glossy white||Retighten|
|Spark plug failure||Damaged||Replace|
Now, let’s have an in-depth discussion.
Trouble Starting The Engine
An engine that won’t start right away is the first sign of a failing spark plug. Then if you visibly check the plug, you will see it has carbon residue. Because of that, it will appear black.
This indicates that the engine is operating on low heat and low compression. And a possibility of a vacuum leak or the spark plug gap being too high.
These reasons result in the engine not having enough power to start. So, you have trouble starting the engine.
If you are facing this symptom we have just explained, then you need to clean it. To clean it up, take a brush that has soft wires.
Then gently clean the black-colored residual carbon from it. Make sure to clean both ends properly.
Engine Cutting Out
Your engine might cut off midway or you’re not getting any throttle response from the outboard. This problem here can be caused by a wet or speckled spark plug.
The wet residue means that there is water in the combustion chamber. And It’s causing the gasket head to fail. Which ultimately causes the engine to hesitate or cut out.
If you find your spark plug in this state you need to wash it. It’s best to wash the spark plug with soap and warm water. Don’t worry, water or soap won’t damage your spark plug.
Engine Losing Power
When the spark plug is overheated, it will get a bright white glossy or glazed look. This is a very dangerous case.
It means the engine is running at a temperature that is too high. Or it could also mean that the spark plug is improperly tightened.
It will cause the engine to lose power, which will soon cause the engine to fail. This is why it is best to take action as soon as you detect the problem. If the engine is ruined that will cause another series of problems.
A bad spark plug does not cause engine overheating. If the spark plug is overheating, that means the problem is in the engine. So, to fix the engine from overheating, get professional help.
If the spark plug is improperly tightened, then take it off and install it again. But make sure to do it properly this time.
Otherwise, the problem won’t be solved.
If an engine is losing its power, then it will slowly but slowly lose performance. As we have said before, an overheated spark plug or engine can cause this. We also told you that it’s a serious issue and needs addressing as soon as possible.
Just like the previous problem, you must properly tighten your spark plug. If it was installed properly then get professional help. Engine issues are sensitive and require expert attention.
Spark Plug Failure
If you have a damaged spark plug your engine might fail to start. Visually check your spark plug to look for any signs of damage. Even though the spark plug could fail eventually while having no obvious signs of damage.
Spark plugs could fail internally. Meaning the electrical component it has is somehow non-functional. In this case, it will produce zero to no spark. If this is the case, you can get professional help or a spark plug checker.
Also, the gap in the spark plug could still cause a failure. It must be precise, even the difference of a fraction of a millimeter could cause problems.
In this case, too, call your mechanic or find a measuring tool to adjust the gap.
If your spark plug is visibly damaged, it is best to replace them. They are super cheap and impossible to repair. It may look fine but still not working, so replace it if that happens. Changing spark plugs is simple to do, it is just basic outdoor maintenance.
There are a couple of things you must know if you need to replace your spark plug.
- Do not buy not automotive plugs, get marine-grade ones.
- Get the spark plug that’s compatible with your engine. You can find that in the manufacturer’s manual.
You can also determine the health of the spark plug by the engine sound. A faulty spark plug makes only two sounds.
- The engine will make rough noises even when it is filled with fresh oil
- No sound at all because it won’t start.
So, if your engine is making weird noises it’s better to check the spark plug. If you find any issues with your spark plug then you know what to do now. Bad spark plugs outdoor can damage your motor.
As a result, you may be required to transport your outdoor motor.
Tips for the future
Here we have gathered some tips for you from our experts. These tips will help you to take better care of your spark plug and increase your awareness.
For better engine health, it is recommended that you –
- Check your spark plugs every 100 hours.
- Replace your spark plugs every 300 hours.
- Spark plugs are very cheap so replacing them is budget-friendly.
- If you need help replacing them call your mechanic.
Want to replace your spark plugs? Check out this product.
Hope you find these suggestions helpful!
Why Does My Boat Lose Power At Full Throttle?
One of the most frequent reasons is your powerboat. It may have trouble reaching the desired speed at full throttle as a spinning prop. This happens when the connection between the propeller and prop shaft on your boat is damaged. This damage causes the rubber inserts to begin rotating on their own.
How Do You Know If Your 2 Stroke Is Running Rich?
Keeping a light load on the engine. Where the throttle will only be opened to about halfway. You will hear a sputtering sound as if the choke is on. And the acceleration will be slow if the needle is set too rich.
What Should 2 Stroke Outboard Spark Plugs Look Like?
Plugs in a 2 stroke engine will always look wet after running. There is a small amount of oil that wasn’t completely burnt off. The mild brownness indicates that your plugs are firing and running the cycle without any problems.
So, this is it. In these ways, you can easily understand the symptoms of bad spark plugs outboard.
In this article, we have tried to discuss all the symptoms. And follow those tips that we have suggested to you. So that you can take better care of your spark plug.
And always be careful and make sure you have taken proper precautions.