sea ray sundancer 280 problems

4 Common Sea Ray Sundancer 280 Problems You Need To Know Of

Introduction

You take your Sea Ray Sundancer for a spin and realize it’s not working properly. So you’re now worried about how to fix it. 

So, how to fix the sea ray Sundancer 280 problems?

Now there might be problems with the hull problems which might need some patchworks for fixing. Moreover, there can be issues with the A/C unit. For this, you might need to prime the unit. There can also be moisture or instability problems that might need a quick review.

Like the short preview? Then let’s jump right into the details. We’ve detailed all the quick fixes down below to help you out!

Common Problems You Might Face With Sea Ray Sundancer 280

Now the Sea Ray 280 Sundancer is one of the best and powerful cruisers out there. But every good thing has a bad side.

But no need to worry. Without further adieu, let’s dive into the most common problems and their possible solutions.

Problem 1 of 4: A/C Unit Problem

Your A/C unit might not function properly due to the lack of water within the system. This is a common problem faced by a lot of Sundancer 280 owners. 

Moreover, this problem occurs due to overheating and a small capacity of the water tank. Due to evaporation, the water flow doesn’t stay at the optimum level. Thus, creating this problem. Sometimes you’d also notice the A/C unit getting shut down automatically on the boat’s dashboard.

The problem also can happen due to the engine. The mercury engine can hamper the power delivery of the boat system as well. hence, the engine outboard crank won’t start.

Solution

Before fixing the problem we need to do an initial clean check. So, examine the sea strainer, intake line from the hull leading to the strainer, and exit line. If they are dirty clean them and give the engine a go again. 

However, it’s still not working, then you’ll need to prime the machine. Read the instructions in your manual to prime the A/C pump and then do it.

Problem 2 of 4: Moisture Problem

Moisture problems are seen in the older models mainly due to the design and structural limitations. Besides a damp and dirty environment within the boat could also create this problem.

Moisture attracts the growth of mold and algae. This makes the boat lose its strike condition and ruin the entire structure.

Solution

Once mold growth starts, it cannot be fixed just by simple cleaning. It’s a long tedious process that includes a lot of work. You’ll need to get your Sundancer 280 to a dry dock and then thoroughly clean the entire cruiser.

As well as, you will need to replace all wooden and any organic parts from it. Only by taking these actions, you can save your boat from constant mold infestation. From then on you need to keep your boat moisture-free at all times. Especially if it’s an older model.

Problem 3 of 4: Instability Problem

This instability happens due to the model having the wrong tabbing trims installed. Also, this might occur due to the handling not being tuned properly. 

Solution

If it’s a problem with trim tabs, then you’ll need to inspect the outdrive trims. If they’re misaligned, then adjust them and the weight distribution of your boat to fix the balance.

We’d like to recommend to you some weight-distributing ballasts for the boat. Here goes:

Product 1
Product 2

These products are the best there is. You can easily use them to solve your instability issues.

Now if this problem arises due to the waves, you need to better control your boat. You can use lube the steering cable on the boat as well for better access. 

Problem 4 of 4: Hull Problem

This is rampant among the older versions of the model. Due to age and poor build quality, the hull of the boat gets damaged. The joints get rusted and leakage may start to happen. 

Also, the fiberglass shell could form cracks and eventually shatter on impact with large waves. This problem makes the Sundancer 280 very risky to use. Moreover, it can even have a negative effect on the buoyancy level of the boat as well.

Solution

The best solution would be to contact the manufacturer. They do have the service to repair or replace the entire hull for you. But they do charge a lot and it can be costly work. But this is the best option you have for now.

Another option is to repair it with the help of your local shipbuilders. They can replace the hull or might do structural patchwork. This is done by patching the crack using the best and strong adhesive like marine tex and jb weld.

This depends on the condition of your hull. They can be a lot cheaper but you’ll have the risk of not having the job done properly

And that’s all about the common problems you may face with the sea ray Sundancer 280 model.

FAQ’s 

Question: How much does a Sundancer 280 weigh?

Answer: The sea ray Sundancer 280 weighs about 8210 lbs. It is one of the best-designed boats of the Sundancer family. This also has a wider body and supreme comfort with better handling.

Question: How fast does a Sea Ray Sundancer go?

Answer: The Sea Ray Sundancer 320 can run at 34.2 mph cruising speed for 4.6 hours. That is before it needs refueling. Although burning 23.5gph (88.95 lph), the top speed was 42.7 mph (68.7 kph). The best cruise was 30.7 mph (49.4 kph) 

Question: Is Sea Ray Sundancer a good boat?

Answer:  The Sea Ray Sundancer series is a super-popular model. Probably the best-selling express boat model of any manufacturer. Sea Ray hit all the right buttons with the Sundancer series.

Conclusion

That’s all about the sea ray sundancer 280 problems. We’ve tried to explain to you the solutions to the problems you might be facing. 

Until next time, see you!

Leave a Comment

Your email address will not be published.

Scroll to Top