how to tow a tube with an outboard motor

How to Tow a Tube with an Outboard Motor? – 6 Steps

Introduction

One of the finest summertime activities is towing when on vacation. However, if you’re just starting off, there are a few things you should know.

Let’s see how to tow a tube with an outboard motor?

You should start off by attaching the tow rope to the stern of your boat. Make the rope suitable for the fun by examining it. Put your life jacket on and keep the manual with you at all times. Next, Follow the map carefully. And finally, drive at a steady speed.

Does this make you confident? I bet it does! 

So hurry up and grab those tubes. Cuz, it’s time to glide!

What Boats Can Be Used for Tubing?

Although tubing can be done in most boats, there are certain boats that are more suitable. See what kinds of boats can provide you with the most enjoyment.

Deck Boats

Deck boats are ideal for towing tubes. They are the most stable and the best boats for tubing. These boats have a flat deck and therefore they can go over fairly shallow water. So they are not too difficult to maneuver. 

Deck boats are also relatively fast. They can go up to a reasonable speed. And this means that you can easily tow tubers behind you through the shallow water. Particularly if you want to propel them with poles or paddles. However, y ou’ll need to have boat steering skills. It’s so that it does not crash into the other tubers.

Pontoon Boats

The pontoon boat is ideal for towing tubers.It lacks a flat deck, which is why. Consequently, you may sit on it without having to put your feet in the water. 

This makes it easier to push tubers through the water if you are paddling behind. Consequently, you may eat while on vacation and still enjoy it.

Ski Boats

The ski boat is also excellent for tubing. You can tie the tow with a ski rope. But there is not enough space for seating (it’s very narrow) and paddles. So, we advise that you paddle a little before heading into the snow-covered water.

When you tow on the ski boat, it can bring the tube in very close proximity.You may now set up and begin tubing. Additionally, it aids in lowering the strain on your body’s muscles. So you can take your tube at different distances. 

Boats That are Unsuitable for Tubing

There are some boats that you shouldn’t be on for towing a tube. They include-

Cabin Cruiser

The cabin cruiser is not suitable for tubing because it is too large and too slow. Additionally, there is not enough room for tubers to sit. You will thus need to tow them in a different manner.

If you want to tow your tube with the cabin cruiser, there are additional drawbacks. You will require a significant amount of gasoline, for example.

You can tow tube with a cabin cruiser in the summer. Or perhaps while having a good time at the beach. But you should avoid doing it on a large river or lake.

V-Bottom Boats

The V-bottom boats are not recommended for tubing either. Because they are usually unstable. Additionally, neither the front nor the back of the boat have a lot of storage room.

How to Tow a Tube with an Outboard Motor in 6 Steps

Now that you know about the boats that are suitable for this activity, let’s do it. Read the following steps carefully, and you’ll know how to tow a tube with the motor. We’ve also mentioned the safety tips and precautions within the steps for your ease.

Step 1: Inflate the Tube

The first thing you need do before starting this activity is to inflate the tube. Please check that the tube has the proper pressure. Since this will prevent the tube from collapsing while on the water. 

For the best tubes for this activity, you can check here-

Product 1
Product 2

Next, examine the tubing for any potential holes or faults. Any boat rider should make sure that the tow line segment is properly secured. It’s to avoid any harm. 

Be sure to keep an eye on the tube’s maximum weight capacity. Be certain to estimate the number of passengers you will be hauling before you begin.

Step 2: Tying the Tow Rope

Attach the tow rope to the stern of your boat. Making a slip knot is the simplest approach to fastening the tow rope. Make sure the bar is secure. This is critical for maintaining the cord’s integrity while driving. 

Keep in mind that the rope knobs for each line come in a variety of styles. Always follow the owner’s manual with this in mind.

Check the rope for any knots or sun damage prior to tying it. Any adjacent item should not get entangled in the rope. This could appear to be a basic process. Yet accidents still happen because some users neglect to check for rope knots.

Step 3: Following the Boat Manual

The manufacturer provides a handbook for each boat. The handbook assists the boat owner in learning how to operate the vessel. 

As a boat driver, you have total command over the vessel. Check that all of the boat’s buttons are in functioning order. 

The map is another essential item to have on hand. Additionally, place the mirror in the most convenient area on the boat.

Step 4: Put on Your Life Jacket

Life jackets and helmets are required equipment for all boat riders. Yes, you may be able to swim. However, keeping a life jacket on hand is still a smart idea. Just in case the worst happens while you’re out on the lake. 

Additionally, become familiar with the relevant safety standards and regulations. Different boating regulations apply depending on the state where you plan to tow. The majority of state laws require boaters to always wear helmets and life jackets.

Step 5: Ready and Steady

The tubing session should be ready for all of the riders on the boat. Before you launch the boat, make sure everyone has a life jacket and a helmet. 

Please review the hand signals before the tubing activity day. This will ensure that you communicate effectively while on board.

Step 6: Slow and Safe Driving

Drive carefully when you and your companions are on the lake. Set outboard controls at neutral and begin towing slowly. If necessary, lube your steering cable for better handling.

The driver must be sober at all times while driving the boat. He or she should be cognitively bright as well. 

Remember that the peak speed on the water should never be more than 20 mph. As a driver, you must be acknowledged of the waterpark regulations.

When you spot a fish, set outboard controls at full-forward. And release the tow rope from the stern until the tube has drifted past the fish.

Pull up the cable on both motors simultaneously. Then stop the engine when the tube is firmly alongside the boat.

Use the proper drive belts to connect the inverter to the motor shafts. As needed, make adjustments for tautness. This prevents the wire from unraveling owing to cable slack.

That’s all folks!

FAQs

How Much Horsepower Is Required for a Boat to Pull a Tube?

To draw a tube, a boat must have at least 35 horsepower. It takes considerable strength to pull a tube. Especially if it’s transporting individuals who are heavier.

What size boat or motor is required to tow a tube?

You’ll need a motor with a horsepower rating of at least 115. Inflatable tubes holding at least two persons are pulled by 60-horsepower motors. A typical boat should have a horsepower of one.

How can the rope be kept out of the water during tubing?

The driver should avoid encountering strong waves as much as possible. In most circumstances, the towing line will become submerged, trapping the riders. Keeping the rope out from the water while tubing might be difficult.

Winding Up

So, we assume that now you know how to tow a tube with an outboard motor. It’s actually a lot of fun to do with your family or friends while on vacation. But accidents happen. So keep an eye out.

All the best!

Leave a Comment

Your email address will not be published.

Scroll to Top