how to remove boat steering wheel

How To Remove Boat Steering Wheel?[ 3 Simple Steps]

Introduction

When you are a boat enthusiast, you often want to upgrade the model of your boat. Changing the steering wheel is one of the most basic tasks that will transform the boat. 

Don’t know how to change your steering wheel? That’s okay because we’ve brought you the perfect guide!

So, how to remove boat steering wheel?

To remove the boat steering wheel, you have to remove the center cap of the steering. Then crack the nut on the hub, and pull the steering wheel. And put the nut back on it. It’s not that complicated task. If the boat is old and the steering wheel is jammed, a gear puller tool can solve the problem.

This might not sufficient to be able to change your wheel on your own. We have a step-by-step process awaiting you!

Want to know the details of removing your boat steering wheel? Then hop on to our fun DIY guide!

How To Remove Boat Steering Wheel?- 3 Simple Steps

Removing the boat steering wheel is a fairly easy task. We have broken down the process into 3 doable steps. You can quite easily do this on your own following our guide.

So, without any further ado, let’s get into the process-

Step 1 of 3: Removing The Center Cap

First of all, you have to uncover the center of the steering wheel. Basically, the center cap only holds this bolt hub. After removing the cap, the nut on the hub will be visible. You have to pick your new steering model based on the bolt size. 

That’s how you can figure out the accurate size of the ratchet for the bolt. 

But if your boat is old or you don’t take proper care of it, it can get difficult. Sometimes, when your boat has been sitting for a long time, it faces some technical difficulties. Because there will be corrosion and other problems on the steering wheel and wires. 

It makes the removing process a little more difficult. Though it is not impossible, since you can fix it by following the methods. 

To save your steering wheel from corrosion and other problems, you can cover it with something. Such as having a bimini top can protect the center cap of your boat. Especially, when you don’t use it that much. 

Bimini top is a roof for your boat and you can fold it as well. So try to cover it up with a bimini top and fold it when you don’t need it.

Step 2 of 3: Cracking The Nut

The second step is cracking the nut. When you remove the center cap, you will see the nut there. You just have to crack that nut. 

You need to pull out the steering wheel underneath the nut. You can do it without a puller tool. Place your leg over the wheel and use one hand on the other side to apply pressure. Thus, the wheel will come out. You can use a hammer if needed.

If your boat is old, it will not be this simple to remove. It’s a very usual problem. Most of the boat owners don’t change their boats for 15-20 years. In that case, you can use a gear puller tool to pull the steering wheel out. It easily gets the job done. 

You can apply some marine-grade corrosion inhibitors in the middle part of the wheel and stud as well.

To help, we have mentioned some good-quality gear puller tools for you. 

Product 1
Product 2

Get your gear puller tools from our suggestions. These will not disappoint you at all.

Step 3 of 3: Putting Back The Nut

Finally, you have to put the nut back on the helm. After pulling out the wheel, put back the bolt on it as it protects the helm. 

Sometimes corrosion creates a jam in the wheel. You can apply grease and lubricant to the steering cable and wheel. It will protect the parts from corrosion. 

You will be able to remove your boat steering wheel by following these steps correctly.  

FAQs

Question: What is the best tool to remove a steering wheel?

Answer: The steering Wheel puller kit is the best tool that you will need while removing a boat wheel. The toolset includes 6 commonly used fasteners that attach pullers to the hub or steering wheel. It also helps to remove the compressed steering column lock plates.

Question: How do you tighten the steering wheel on a boat?

Answer: First of all, you have to check the cable nut on the tilt tube of the outboard. You will be able to find out how loose or how tight it is. Then move the wheel while watching the tilt tube. Use an open-end wrench to tighten the cable nut when it moves. It will tighten the steering wheel of the boat.

Question: How to remove a bass boat steering wheel?

Answer: If the steering wheel is old, look for the threaded holes on your steering wheel hub. It is used to remove the puller. Then use the appropriate bolts to attach the steering wheel puller. The steering wheels are designed in such a way that you can pull them out to remove the wheel.

Question: What to do if the boat steering is too hard?

Answer: If the boat steering is too hard to move, first check if there is adequate grease on the motor. This lubricant helps the steering to move smoothly. If your boat steering is unusually hard, you can apply this grease to make it user-friendly.

Conclusion

These were the methods we had to share to help you with how to remove boat steering. We hope with these simple steps, you will be able to remove the steering wheel. 

It may seem a little difficult. But once you get done with it, it will be quite easy next time. 

Good luck with the task!

Leave a Comment

Your email address will not be published.

Scroll to Top