hangkai outboard problems

Hangkai Outboard Problems and Their Solutions

Introduction

Imagine you took your boat that has a Hangkai outboard engine for fishing.

All of a sudden the motor stopped working. In the middle of nowhere!

Now, this can be a troublesome issue.

So what Hangkai outboard problems got you stuck in the middle of the river?

Often the safety clutch can have problems. As a result, you may not be able to run the boat. Sometimes, the inlet or outlet pipe of the tank may get loose. Besides, if the air cap becomes faulty, you may not get a perfect mixture of oil and air. This can also create problems for the engine.

To fix the issues, you need to know a few things first.

Here I am to rescue you from boat issues. I have gathered some possible issues and their fixes for the motor.

Let’s go then!

What are the Hangkai Outboard Problems?

According to the Hangkai outboard review, the engine can have multiple problems. So, you have to figure out these issues first. Only then can you apply the specific fix.

Safety Clutch Issue

Safety clutch issue is one of the most common outboard trigger problems. The same goes for any Hangkai outboard engines.

Sometimes, you may notice that the machine is not starting. Even though you have pulled the key. Still, the machine remains idle. Why?

Every Hangkai engine comes with a safety clutch. The clutch makes sure that the engine does not get started at the wrong place. 

Thus, you have to turn down the safety clutch before starting the boat.

However, this safety clutch can get stuck. Or it may block the starting of the engine even after you have removed the clutch.

Result? Your Hangkai outboard 6 HP engine won’t start!

Fuel Line Not Connected

Sometimes if the engine has not started, perhaps the fuel got disconnected. It is another Hangkai outboard problem.

Technically, the Hangkai engine contains a small fuel tank. And the tank stays connected with two pipes.

These pipes make sure that the engine gets the fuel properly.

Unfortunately, these pipes can get displaced. Sometimes even the connection of the pipes can get broken.

As a result, the fuel fails to reach the motor.

Guess what happens after that? Yes. the motor fails to work. 

Even the pipes can get loose when you are on board. You may find the boat motor stopped suddenly in the middle of the river. Because of this problem obviously!

Dead Spark Plug

Now if the spark plug does not work, how will you run the motor? 

The spark plug issue is one of the common fusses about the Hangkai outboard engine. 

You may notice that while trying to start the engine, it’s not getting started. The reason is pretty obvious. The boat ignition switch is not working. That’s it!

There can be several causes for which the spark plug can get dead.. 

Mostly it’s the kill lines that can damage the spark plug. Sometimes the kill lines can get closer to the exhaust lines. 

And because of the heat of the exhaust lines, the kill lines can get damaged. Eventually, the kill lines can get shot-circuit.

Hence, the spark plug fails to work. And when you try to activate the motor, no spark will get generated.

Faulty Air Cap

Let’s look into another issue. A faulty air cap. This can also create issues for the Hangkai engine. Just like Suzuki 200 HP outboard’s issue.

The air cap controls the flow of the air to the oil. Thus the air mixes with the oil and makes the perfect fuel for the boat.

However, this air cap can get damaged. Eventually, it can damage the air compartment.

This way, the air fails to mix with the oil in a proper ratio. And the ratio of the oil increases in the fuel.

So, when you start your motor, you will see smoke around the engine. It’s because the fuel had excessive oil. This oil gets burnt and there comes the smoke out of the motor.

Guess who is responsible for this? The faulty air caps!

Speaking of air caps, check out these air filter caps:

Product 1
Product 2

These Hangkai outboard parts are the best-selling right now. Better check them out!

How to Fix the Problems?

Well, this far we have seen some of the major Hangkai outboard engine issues.

These outboard motor problems can be pretty irritating. Therefore it is best to fix them as soon as possible. 

Here are a few fixes that can help you up.

Prime the Engine

Always properly prime the engine before starting the boat. This way the motor does not get damaged by the fuel. 

Priming warms up the engine. Thus the engine can perform smoothly. 

If you don’t prime the engine, the engine may not get greased properly. Ultimately, things can get quite messy.

So, whenever you are up for any boat trip, prime the Hangkai motor first!

Use Spring Clips

If you are having outboard fuel line problems, spring clips are the best option.

 As we have seen earlier, the pipe of the fuel tanks may get detached. Simply grab some spring clips. Then attach them to the place where the pipes stay connected. This way, the pipe won’t get loose. 

Repair the Safety Clutch

Most of the time, the safety clutch gets stuck either it is misplaced or got a bot bent. 

If the safety clutch gets misplaced, you can use a spring clip like previously. It will hold the clutch in its position. 

However, if the clutch gets bent, you have to repair the safety clutch. And make it straight. 

Separate the Kill Lines

Keep the kill line far from the exhausting units. The best way is to change the position of the kill lines. Thus, no short-circuit will take place and the spark plug will work properly. 

There you go! Always keep these fixes in mind. Whenever you face any Hangkai outboard problem, you know what to do!

FAQs

How Can I Prevent Bowden Cable from Melting?

Keep the cables away from the exhaust. The exhaust is hot and thus, it will melt the Bowden cables. To do so, rearrange the position of the wires. Plus use clips to set the wires. Not only the clip will hold the wires together. Also, it will keep the wires away from the exhaust.

Can I Decrease The Noise of The Hangkai Motor?

Yes. You can decrease the noise of the Hangkai outboard motor. For this, you will need a suppressor. Once you get the suppressor, place it at the housing of the engine. Thus, the sound of the engine will be reduced. 

Why Is My Boat Losing Power?

A dirty filter for fuel is maybe what makes the boat lose power. Over time, the fuel filter may get blocked by the rubble.  Moreover, if the connections of the motor of the boat have issues. The power of the boat will decrease too. In such cases, it’s best to change the filter. Or clean the filter.

Last Words

Finally! Now you know about the Hangkai outboard problems. Also about their fixes. Then, my friend, our journey stops here.

If you still think you have queries, don’t worry. You can go to any boat expert. They might be able to fill you up.

Have a great day then.

Good bye!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top