boat steering wheel play adjustment

Boat Steering Wheel Play Adjustment (Follow 5 Steps)

Introduction

We all want to keep our boat in proper maintenance. But the boat steering play can be really annoying especially when it requires adjustment.

Don’t panic, you can easily adjust them following some quick and easy steps.

So, how can you do Boat Steering Wheel Play Adjustment?

To fix the play in your boat steering, you’ll need a wrench and screwdrivers. With those, you need to take a look at the steering cable and nuts. Tighten the cable screws and replace cable nuts. Finally, attach another steering cable and keep everything back to its previous place.

So, that was a quick look at the fixing guide. But it shouldn’t be enough for you? Well, have discussed things elaborately below. So let’s get started!

How to Adjust the Steering Wheel Play

Like the engine, steering is a very important part of any vehicle. Without any steering, you cannot control the boat going left or right. You cannot go only straight while driving. That is why steering is important. 

Also, a broken or loose steering can be more problematic. There are signs for problematic steering. If your steering isn’t straight, your boat can go the wrong way. That is why precision steering is important. And there are ways you can adjust the steering on your boat. 

To do the adjustment, you will be needing a screwdriver and a wrench. You also might need to replace the wire on the steering. Cause over a period of time the wire can get Loose. And eventually, that can cause the loose of play on the steering. 

Below, we divided the whole steering adjustment process into 5 steps. This way you can have a proper understanding of what you really need to do. So go through the steps from 1 to 5, to do adjustments to your steering. 

Step 1: Check on the Tilt Section

Before you start working on the steering, you have to see where the problem is. Cause without that you cannot be sure where to work on. 

But to check where the problem is, you need help from someone else. Bring a friend or anyone who can help and tell them to turn the wheel. While the wheel is being turned, you need to do the observations. 

Keep an eye on the tilt section on the cable screws. The cable screws are which hold the cables. The screws should be snug on the slant tube. Now if the cable screws are loose, you need to tighten them. 

Step 2: Tighten the Cable Screws

To tighten the cable screws, you’ll be needing an open-end tool. Otherwise, you cannot fit any tool inside the engine area. 

With the open-end tool, tighten the screws on the cable. The steering rack wire nuts should be tight. Also, the wires should be able to move smoothly. So don’t tighten the screws with all of your strength. 

But what to do, if the nuts are tight, but still there is a play on the steering. In that case, you need to change the screws. 

Step 3: Replace the Cable Nuts

There are nuts on both ends of the wires. These nuts are which hold the steering wires. If nuts on both ends are snug, then you need to replace the nuts. If the cables are too damaged, you need to change the steering cables as well. 

If you are looking for cables to buy for your steering, check the links below. Both of these cable manufacturers make them in different sizes. So you can get the exact size of cable you need. 

Product-1
Product-2

Both of these cables are strong enough to use for a long time. They can withstand strong waves and your crazy drivings. 

Also, while you change the nut on the steering, check on the cables themselves. Sometimes when the nuts are loose, the cable rip away. And that might cause you trouble while you driving. That is why it is better to change. 

You can leave the nuts and bolts on the front of the boat in place. 

Step 4: Attach a New Steering Cable

Get your new steering cables, and you have to put these on. Also, you need to screw the nuts in so that the cable stays secure. 

Lubricating the new cables the proper way is really necessary. Lubricating will make sure that the cables don’t strip while they are moving. The cables move back and forth when you steer the boat. If the cables are not oiled, they can get stripped. 

Also, rust can form over the cables without proper lubrication. 

Step 5: Put Everything Back on 

Now by following the above steps you can get your steering play adjustment right. But don’t go out for a run right after your adjustments. Make sure all the nuts and screws are tight. Also, cover the exposed parts otherwise water can get inside. 

And this is how you can adjust the steering on your boat. This problem is common for the sea star hydraulic steerings. But now you know how you can fix it. 

How Can you Prevent Wheel Play?

To prevent wheel play, make sure you use the steering right. Any boat or vehicle has a turning radius. And the wheel can turn only the determined degrees it is supposed to. If you turn the wheels more than it can, it can stretch the wheels. 

If the steering rudder touches anything underwater, it can get damaged. But in most cases, you cannot notice if anything is under there. But always be careful where you park your boat. Check if there are any obstacles underwater. 

Also, if the water body you drive is too rough, the steering can be damaged. So make sure to do a maintenance run when you head back in the water. 

If your boat has loose steering, it can move sideways or go in the wrong direction. That is why it is better for you to fix the steering first. 

FAQs

How Much Play Should be in Boat Steering Wheel

Turn the wheel all the way to check how much the steering turns. The max should turn is more or less than 20 degrees. And steering fluid should be at the bottom of the fill port in the boat. 

What makes a Boat Hard to Steer?

If the steering is hard to move, you should check the steering fluid level. Also, check if the steering is greased enough. Without any lubrication, it can be hard to move the steering. Also, it can damage the parts inside. 

What are the Hydraulic Steering Problems on a Boat?

The main problem people face with hydraulic steering is leaks in the steering. There are oils in the hydraulic chamber which can break out of there. Also, if the fluid level is low, it can be hard to move the hydraulic steering. 

Endnote

So, that was everything you needed to know about Boat Steering Wheel Play Adjustment. 

Always make sure all the components are good before you head out in the water. Proper maintenance is crucial to reduce any risks. 

Good luck with your boat steering!

Leave a Comment

Your email address will not be published.

Scroll to Top