A generator that converts energy into the alternating current is known as an alternator. Sometimes while converting, diodes that help the current to flow in one direction get burned because of sudden power cut off. People use the alternator field disconnect switch to prevent this type of incident.
Now you must be curious about the alternator field disconnect switch. Don’t worry, we’ve got you covered!
So, what is the alternator field disconnect?
Alternator Field Disconnect is primarily a switch. When the battery is suddenly turned off while the alternator is working, the current has nowhere to go. In such cases, the voltage can suddenly rise and cause a serious malfunction to the system.AFD switches create a path for the current and avoid sudden burning.
This is just the tip of the iceberg, there’s a lot more you don’t know about it. We have prepared a detailed discussion about AFD switches.
Sounds like something you’d be interested in learning more about? Then let’s dive into the article right away.
What is Alternator Field Disconnect?
Alternator Field Disconnect is a separated single pole switch in the alternator. Through this switch, the field current wire is connected to the voltage regulator wire.
The voltage of the alternator rises when the switch of battery is suddenly turned to ‘OFF’ when the alternator is running. This will quickly burn out the rectifier’s diodes.
And the alternator is ultimately damaged. This is why, from time to time, we find mercury outboards cranking but they won’t start. An alternator field disconnect (AFD) is used to prevent this. It essentially disables the alternator’s output.
How Does Alternator Field Disconnect Work?
Just like an AC generator, the alternator is also engine-driven. It is made up of electromagnets placed on a rotor.
Electromagnets are fueled by field currents to generate a magnetic field. While the rotor is spinning, the alternator produces alternating current. Diodes are used to make the current flow in one direction.
If it is turned off suddenly, the current that was converting at that time loses its path. Unless there’s an open path for the current to go, it will go towards diodes and burn them. This can hamper the engine and cause the outboard motor not to start. The AFD switch in the alternator stops this from happening.
The AFD switch only closes after all the connections to the main switch have been closed. This leaves a path for the current to go into the AFD switch and prevent any unwanted outcomes.
Why Use An Alternator Field Disconnect in Your Boat?
While you are on the water, the safety of you and your crew or family members is crucial. When there’s a sudden power cut and the diodes are burnt as a result, that particular alternator will stop working.
Sometimes this can go unnoticed if the owner is new or not an expert. It can be very dangerous to go on the water with a malfunctioning alternator.
Or worse if this happens while you are already out on the water, then you would have to paddle all the way back home.
Using an alternator with an AFD switch will ensure no burning of diodes and a well-functioning alternator. So you can easily enjoy smooth sailing around the ocean and back home.
What’s The Alternate Option of AFD Switch?
People usually face one common problem while installing an AFD switch. That is, it works only with regulated alternators which are external. Because the field wire is only accessible to these alternators.
And even though you have regulated alternators, you need to make some alterations to the wiring of the boat. You need to change the field wire direction from regulators to the alternator and make a redirection via the battery switch.
It is this extra bit of installation work that normally drives people away from AFD. There is, however, another option. You can run the output wire directly to the battery. This will protect the alternator from accidents.
Just like it’s important to decide between Volvo Penta and Mercruiser motor while buying a new boat, it is also important to buy an alternator with the AFD switch. AFD switch is a very important feature of an alternator. Not only does it save diodes from burning it also ensures your on-boat safety while sailing.
Question: What is the maximum time a car can operate without an alternator?
Answer: Because many components will run faster than in older cars, a 12-volt battery will last around 30 minutes to an hour without lights or air conditioning. Starting a car requires a lot of strength. You should either get a more powerful battery or repair your alternator.
Question: How do you use a screwdriver to inspect an alternator?
Answer: Check for magnetism in the alternator. Place the metal end of a metal screwdriver on the alternator shaft which is near the bolt. If the screwdriver is drawn towards the alternator, it is working properly; however, if it is not instantly drawn to the shaft, it is not working.
Question: Can we utilize an alternator as a motor?
Answer: We’ve discovered that an alternator works just as well as a motor whether powered by a 36V or 48V supply, as long as a powerful controller is utilized. The motor is less efficient than a permanent magnet since it must consume that power, but the price of a discarded alternator is hard to beat.
Question: What will the cost of replacing the alternator be?
Answer: When your automobile begins to have electrical issues, it’s time to replace the alternator. A new alternator along with servicing will the total cost will be around $500 to $1000.
That’s all we had for the alternator fields disconnect. We hope this article has answered all of your questions.
For further queries, don’t hesitate to ask a professional. It’s always better to take professional help rather than going about electrical things you don’t have sufficient knowledge of. Till then best wishes and happy sailing!